Stock with Adjustable Cheek Rest - Artemis Snowpeak SPA PP750

Should fit the Umarex Notos as well. But we can't guarantee because we don't have one.

A super sturdy, fixed stock for the PP750 with an adjustable cheekrest. It replaces the original grips and the original sliding stock. It uses a 25mm tube (INCLUDED IS ALUMINIUM TUBE 25mm), which can be practically anything you want (PVC, aluminum, carbon fiber, etc.). The cheek rest is adjustable by loosening the adjustment knobs on the sides. It uses the original rubber pad on the back. The Picatinny rail at the rear of the stock can be used for a monopod, sling mount, or something else.

How to Mount:
First, take off the original grips and sliding stock (with the small black things). Take your chosen "Adapter" and put an M5 nut in the hole on the inside. Use the M5x12mm screw to fix the "Stock part 2" to the adapter. Slide the tube in the adapter, use glue if it is too loose. Next, assemble the rear part of the stock using the included exploded diagram, again use glue if the tube is too loose. You now have the complete stock assembled, and you can mount it on the gun using the 4 stock screws.

The holes for the tube are 25mm so the tube might need some glue to stay fixed. Since we put a wrap on the tube it fits very well in the stock without any play, and no glue was needed.

Due to transport and different optical sights, the aluminum tube is not glued, use a little silicone or any other glue to stick it. Also, the tube is sent 25 cm (due to different optical scopes) in length, which you will then shorten to the desired length if necessary. First, roughly measure the length needed to be able to use the optical scope, and only then cut the tube to the required length. The aluminum tube can be polished or painted according to your wishes. There are 2 screws and nuts that you have to buy yourself and install to connect the handle and the stock.

In the Material option, select the material from which you want the product to be made.